Камера AUTODOME 7000 IP
136 300 руб.
Полное описание
-
IP-камера с режимом «день/ночь», 28- или 36-кратным оптическим увеличением (12-кратным цифровым увеличением), широким динамическим диапазоном (WDR) и режимом баланса белого при свете натриевой лампы, который восстанавливает естественный цвет объектов.
-
Новая функция интеллектуального слежения Intelligent Tracking и механизм реагирования на тревоги, основанный на встроенной интеллектуальной системе анализа видеоданных (IVA).
-
Повышенная степень гибкости системы с двойной записью (на карту SD и iSCSI).
-
Полностью настраиваемая четырехканальная потоковая передача с отдельно настраиваемыми потоками SD на базе платформы Common Product Platform (CPP4) от компании Bosch.
-
Простая, интуитивно понятная установка и несколько предварительно настроенных пользовательских режимов, которые позволяют пользователю выбрать конфигурацию камеры, идеально подходящую для конкретной области применения.
| Imager | 1/4 in.-type Exview HAD CCD (progressive scan) |
| Effective Picture Elements | PAL: Approx. 440,000; 752(H) x 582(V)NTSC: Approx. 380,000; 768 (H) x 494 (V) |
| Lens | 36x Zoom (3.4–122.4 mm) F1.6 to F4.5 |
| Focus | Automatic with manual override |
| Iris | Automatic with manual override |
| Zoom Movement Speed | NTSC , PAL |
| Optical WIDE / Optical TELE –Focus Tracking ON | 4.0 sec. , 4.0 sec. |
| Optical WIDE / Optical TELE –Focus Tracking OFF | 2.7 sec. , 2.7 sec. |
| Optical WIDE / Digital TELE | 6.0 sec. , 6.2 sec. |
| Digital WIDE / Digital TELE | 2.1 sec. , 2.3 sec. |
| Optical Zoom Field of View (FOV) | 1.7° to 57.8° |
| Minimum Working Distance | 320 mm (wide) to 1500 mm (tele) |
| Gain Control | Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
| Synchronization | Line-Lock (–120° to 120° vertical phase adjust) or internal crystal |
| Aperture Correction | Horizontal and vertical |
| Digital Zoom | 12x |
| Sensitivity (typical) 1 | 30 IRE , 50 IRE |
| Day Mode | |
| SensUp Off(NTSC: 1/60sPAL: 1/50s) | 0.66 lux(0.061 fc) , 1.4 lux(0.13 fc) |
| SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.04 lux(0.0037 fc) , 0.1 lux(0.0092 fc) |
| Night Mode | |
| SensUp Off | 0.104 lux(0.0097 fc) , 0.209 lux(0.0194 fc) |
| SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.0052 lux(0.0005 fc) , 0.0103 lux(0.001 fc) |
| Electronic Shutter Speed | NTSC: 1/4 to 1/10,000 sec., 20 stepsPAL: 1/3 to 1/10,000 sec., 20 steps |
| Wide Dynamic Range (WDR) | 92 dB (50 dB with WDR Off) |
| Signal-to-Noise Ratio (SNR) | >50 dB (Weighting ON) |
| Backlight Compensation | On/Off |
| White Balance | ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
| Stabilization | On/Off |
| 1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission). | |
| Imager | 1/4 in.-type Exview HAD CCD (progressive scan) |
| Effective Picture Elements | PAL: Approx. 440,000; 752(H) x 582(V)NTSC: Approx. 380,000; 768 (H) x 494 (V) |
| Lens | 28x Zoom (3.5–98.0 mm) F1.35 to F3.7 |
| Focus | Automatic with manual override |
| Iris | Automatic with manual override |
| Zoom Movement Speed | NTSC , PAL |
| Optical WIDE / Optical TELE –Focus Tracking ON | 2.5 sec. , 2.5 sec |
| Optical WIDE / Optical TELE – Focus Tracking OFF | 1.7 sec. , 1.7 sec. |
| Optical WIDE / Digital TELE – Focus Tracking ON | 4.5 sec. , 4.9 sec. |
| Optical WIDE / Digital TELE – Focus Tracking OFF | 1.7 sec. , 1.7 sec. |
| Digital WIDE / Digital TELE | 2.0 sec. , 2.5 sec. |
| Optical Zoom Field of View (FOV) | 2.1° to 55.8° |
| Minimum Working Distance | 300 mm (wide) to 1500 mm (tele) |
| Gain Control | Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) |
| Synchronization | Line-Lock (-120° to +120° vertical phase adjust) or internal crystal |
| Aperture Correction | Horizontal and vertical |
| Digital Zoom | 12x |
| Sensitivity (typical) 2 | 30 IRE , 50 IRE |
| Day Mode | |
| SensUp Off | 0.33 lux(0.031 fc) , 0.66 lux(0.061 fc) |
| SensUp On(NTSC: 1/4s, 15X; PAL 1/3s, 16.7X) | 0.02 lux(0.002 fc) , 0.04 lux(0.004 fc) |
| Night Mode | |
| SensUp Off | 0.066 lux(0.006 fc) , 0.166 lux(0.015 fc) |
| SensUp On(NTSC: 1/4s, 15X;PAL 1/3s, 16.7X) | 0.0026 lux(0.0002 fc) , 0.0082 lux(0.0008 fc) |
| Electronic Shutter Speed | NTSC: 1/4 to 1/10,000 sec., 20 stepsPAL: 1/3 to 1/10,000 sec., 20 steps |
| Wide Dynamic Range (WDR) | 92 dB (50 dB with WDR Off) |
| Signal-to-Noise Ratio (SNR) | >50 dB (Weighting ON) |
| Backlight Compensation | On/Off |
| White Balance | ATW, Indoor, Outdoor, AWB Hold, Extended ATW, Manual, Outdoor Auto, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
| Stabilization | On/Off |
| 2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission). | |
| In-Ceiling | Pendant |
| Pan Range | 360° cont. , 360° cont. |
| Tilt Angle | 1° above horizon , 18° above horizon |
| Pre-position Speed | Pan: 400°/sTilt: 300°/s , Pan: 400°/sTilt: 300°/s |
| Pan/Tilt Modes | |
| Turbo Mode(Manual Control) | Pan: 0.1°/s – 400°/sTilt: 0.1°/s – 300°/s |
| Normal Mode | 0.1°/s-120°/s , 0.1°/s-120°/s |
| Preset Accuracy | ± 0.1° typ. , ± 0.1° typ. |
| In-Ceiling | Pendant |
| Input Voltage | 21-30 VAC ,50/60 HzHigh PoE or PoE+ (IEEE 802.3at, class 4 standard) , 21-30 VAC, 50/60 Hzor High PoE |
| Power Consumption,typical | 24 W / 44 VA , 60 W / 69 VA (heaters on)or24 W / 44 VA3 (heaters off) |
| 3. Without heater connected in power supply box for indoor applications. |
| Protection on Alarm Inputs | Peak current 17 A, peak power 300 W (8/20 μs) |
| Protection on Alarm Outputs | Peak current 2 A, peak power 300 W (8/20 μs) |
| Protection on Relay Output | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on Power Input (Dome) | Peak current 7.3 A, peak power 600 W (10/1000 μs) |
| Protection on PowerOutput (Arm Power Supply) | Peak current 21.4 A, peak power 1500 W (10/1000 μs) |
| 10/100 EthernetData Lines | Peak current 14 A, peak power 200 W (8/20 μs) |
| Camera Setup/Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), or Bosch Video Client (BVC) |
| Software Update | Network firmware upload |
| Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG |
| Encoding / Streaming | |
| H.264 | MJPEG |
| Scenario | |
| Stream 1 | Stream 2 , Stream 3 , Stream 4 |
| 1 | 4CIF@30ips , 4CIF@30ips , I-frameonly fromStream 1 , 4CIF@30ips |
| 2 | 4CIF@30ips , Copy ofStream 1 , I-frameonly fromStream 1 , 4CIF@30ips |
| 3 | Downscaledstream , Downscaledstream , I-frameonly fromStream 1 , Downscaledstream fromStream 1 |
| GOP Structure | IP, IBP, IBBP |
| Data Rate | 9.6 kbps to10 Mbps (per stream) |
| Overall IP Delay | 240 ms |
| Resolution (Horizontal x Vertical, PAL/NTSC) | |
| 4CIF/D1 | 704 x 576/480 (25/30 ips, or 50/60 fields/s for interlaced fields) |
| CIF | 352 x 288/240 (25/30 ips, or 50/60 fields/s for interlaced fields) |
| Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
| Advanced Networking | IPv6, QoS |
| Audio | |
| Standard | G.711, 8 kHz sampling rateL16, 16 kHz sampling rateAAC, 16 kHz sampling rate |
| Signal-to-Noise Ratio | >50 dB |
| Audio Streaming | Bidirectional (full duplex) |
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) |
| Recording | Continuous recording of video and audio |
| VG4-SFPSCKT | |
| Description | Fiber Optic Ethernet Media Converter kit5.Requires a small form-factor pluggable (SFP) module (sold separately). |
| Data Interface | Ethernet |
| Data Rate | 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port |
| Compatible Receiver | CNFE2MC |
| Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware |
| 5. Kit available separately and must be installed inside the AUTODOME power supply box. | |
| SFP Modules | |
| Description | Interchangeable modules available for use with MMF or SMF optical fiber. |
| Data Interface | Ethernet |
| Data Rate | 10/100 MbpsIEEE 802.3 Compliant |
| Mechanical | |
| Dimensions (LxWxH) | |
| SFP-2 and SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) |
| SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) |
| Weight (all SFP modules) | 0.23 kg (.05 lb) |
| Type | Connector , Wavelength (transmit / receive) , Max. Distance |
| SFP-2 | MMF , Duplex LC , 1310 nm / 1310 nm , 2 km (1.2 miles) |
| SFP-3 | SMF , Duplex LC , 1310 nm / 1310 nm , 20 km(12.4 miles) |
| SFP-25 | MMF , Single SC , 1310 nm / 1550 nm , 2 km(1.2 miles) |
| SFP-26 | MMF , Single SC , 1550 nm / 1310 nm , 2 km(1.2 miles) |
| Fiber Compatibility | |
| Optical Fiber Compatibility, MMF | 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. |
| Optical Fiber Compatibility, SMF | 8–10/125 µm SMF. Must meet or exceed fiber standard ITU-T G.652. |
| Optical Distance Specifications | Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate. |
| Sectors/Titling | 16 independent sectors with a 20-character title/sector |
| Masking | 24 individually configurable privacy masks |
| Pre-positions | 256, each with a 20-character title |
| Guard Tours | Two (2) types of tours:Recorded tours – two (2)Preset tour – one (1), consisting of up to 256 scenes, consecutively |
| Supported Languages | English, Chinese, Dutch, French, German, Italian, Japanese, Polish, Portuguese, and Spanish |
| Power, Camera | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) or PoE+ (IEEE 802.3at, class 4 standard)21-30 VAC, 50/60 Hz |
| Power, Heater | RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE))21-30 VAC, 50/60 Hz |
| Video and Control | RJ-45 10/100 Base-TX Ethernet |
| Alarm Inputs (7) | 2 supervised; 5 non-supervisedProgrammable for “normally open” or "normally closed" |
| Alarm Outputs (4) | 1 dry contact relay; 3 open collector/transistor outputs32 VDC @ 150 ma max. |
| Audio | 1 x mono line in, 1 x mono line out |
| Signal line in | 12 kOhm typical, 1 Vrms max |
| Signal line out | 1 Vrms at 1.5 kOhm, typical |
| In-Ceiling | Pendant |
| Ingress Protection Rating/Standard | IP54, Plenum rated , IP667 |
| NEMA 4X for:Access to Hazardous partsIngress of solid foreign objects (falling dirt, circulating dust, settling dust)Ingress of water (dripping and light splashing, hosedown and splashing)Corrosive agents | |
| Operating Temp. | -10°C to 40°C(14°F to 104°F) , -40°C to 55°C(-40°F to 131°F)or-10°C to 55°C(14°F to 131°F)6 |
| Storage Temp. | -40°C to 60°C(-40°F to 140°F) , -40°C to 60°C(-40°F to 140°F) |
| Humidity | 0% to 90% relative, non-condensing , 0% to 100% relative, condensing |
| 6. Without heater connected in power supply box for indoor applications.7. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble.Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble. | |
| Dimensions | See dimensional drawings |
| Weight | |
| In-ceiling | 2.58 kg (5.69 lb) |
| Indoor/Outdoor Pendant | 3.06 kg (6.75 lb) |
| Bubble Size | 153.1 mm diameter (6.03 in.) |
| Construction Material | |
| Housing | In-ceiling: MagnesiumPendant: Cast aluminum |
| Bubble | In-ceiling: High-resolution acrylic, rugged polycarbonate, or HD high-resolution acrylicPendant: High-resolution acrylic or rugged polycarbonate |
| Standard Color | White (RAL 9003) |
| Standard Finish | Powder coated, sand finish |
| Bubbles | |
| In-ceiling | |
| Clear high-resolution acrylic(Included with in-ceiling PAL camera models.) | VGA-BUBBLE-CCLA |
| Tinted high-resolution acrylic (Included with in-ceiling NTSC camera models.) | VGA-BUBBLE-CTIA |
| Clear rugged polycarbonate | VGA-BUBBLE-CCLR |
| Tinted rugged polycarbonate | VGA-BUBBLE-CTIR |
| Clear HD high-resolution acrylic | VGA-BUBHD-CCLA |
| Tinted HD high-resolution acrylic | VGA-BUBHD-CTIA |
| Pendant | |
| Clear high-resolution acrylic(Included with pendant camera models.) | VGA-BUBBLE-PCLA |
| Tinted high-resolution acrylic | VGA-BUBBLE-PTIA |
| Clear rugged polycarbonate | VGA-BUBBLE-PCLR |
| Tinted rugged polycarbonate | VGA-BUBBLE-PTIR |
| Pendant Arm Mounts | |
| Wall Arm (No Transformer) | VG4-A-PA0 |
| Wall Arm (120/230 VAC Transformer) | VG4-A-PA1 / VG4-A-PA2 |
| Pendant Arm with Wiring | VGA-PEND-ARM |
| Mounting plate for VGA-PEND-ARM | VGA-PEND-WPLATE |
| Trim skirt for VG4 Series Power Supplies | VG4-A-TSKIRT |
| Optional Mounting Plates for Arm Mounts | |
| Corner Mounting Plate | VG4-A-9542 |
| Mast (Pole) Mounting Plate | VG4-A-9541 |
| Pendant Pipe Mounts | |
| Pipe Mount Cap | VG4-A-9543 |
| Pendant Roof Mounts | |
| Roof (Parapet) Mount(VG4-A-9543 Pipe Mount Cap required. Available separately.) | VGA-ROOF-MOUNT |
| Optional Mounting Plates for Roof Mounts | |
| Flat Roof Adapter for Parapet Mount | LTC 9230/01 |
| In-ceiling Support Kits | |
| Bracket for suspended or drop ceilings | VGA-IC-SP |
| Power Supplies | |
| High PoE Midspan 60W, single port, AC in | NPD-6001A |
| Outdoor Power Supply Box, no transformer | VG4-A-PSU0 |
| Outdoor Power Supply Box (120/230 VAC Transformer) | VG4-A-PSU1 / VG4-A-PSU2 |
| Fiber Optic Kit | VG4-SFPSCKT |